From 6540b137ba61445dbf4cd388d27c06516b713cee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E9=BB=84=E5=85=B4=E7=85=8C?= <203837309@qq.com> Date: Sat, 9 May 2026 17:24:36 +0800 Subject: [PATCH 1/2] =?UTF-8?q?20260509=20=E5=A4=9A=E8=87=82=E4=BA=92?= =?UTF-8?q?=E9=80=9A?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- ...32\350\207\202\344\272\222\351\200\232.md" | 472 ++++++++++++++++++ 1 file changed, 472 insertions(+) create mode 100644 "20 \351\273\204\345\205\264\347\205\214/20260509 \345\244\232\350\207\202\344\272\222\351\200\232.md" diff --git "a/20 \351\273\204\345\205\264\347\205\214/20260509 \345\244\232\350\207\202\344\272\222\351\200\232.md" "b/20 \351\273\204\345\205\264\347\205\214/20260509 \345\244\232\350\207\202\344\272\222\351\200\232.md" new file mode 100644 index 0000000..987e1af --- /dev/null +++ "b/20 \351\273\204\345\205\264\347\205\214/20260509 \345\244\232\350\207\202\344\272\222\351\200\232.md" @@ -0,0 +1,472 @@ +``` +Router0 +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#int f0/0 +Router(config-if)#no shu +Router(config-if)#no shutdown + +Router(config-if)# +%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up + +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.1.254 255.255.255.0 +Router(config-if)#ex +Router(config)#int s2/0 +Router(config-if)#no sh +Router(config-if)#no shutdown + +%LINK-5-CHANGED: Interface Serial2/0, changed state to down +Router(config-if)#ip ad +Router(config-if)#ip address 10.254.10.1 255.255.255.0 +Router(config-if)#cl +Router(config-if)#clock r +Router(config-if)#clock rate 64000 +Router(config-if)# +%LINK-5-CHANGED: Interface Serial2/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up + +Router(config-if)#ex +Router(config)#ip rou +Router(config)#ip route 192.168.2.0 255.255.255.0 10.254.10.2 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router> +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#int f0/0 +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.2.254 255.255.255.0 +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.3.254 255.255.255.0 +Router(config-if)#ip ad +Router(config-if)#ip address 20.20.10.2 255.255.255.0 +Router(config-if)# +Router(config-if)# +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.1.254 255.255.255.0 +Router(config-if)#ex +Router(config)#ip rou +Router(config)#ip route 192.168.3.0 255.255.255.0 20.20.10.2 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#ip ro +Router(config)#ip route 192.168.2.0 255.255.255.0 20.20.10.1 +Router(config)#ip r +Router(config)#ip route +``` + +``` +Router1 +Router(config-if)#no shu +Router(config-if)#no shutdown + +Router(config-if)# +%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up + +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.2.254 255.255.255.0 +Router(config-if)#ex +Router(config)#int s2/0 +Router(config-if)#no shu +Router(config-if)#no shutdown + +Router(config-if)# +%LINK-5-CHANGED: Interface Serial2/0, changed state to up + +Router(config-if)#ip +%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up + +% Incomplete command. +Router(config-if)#ip ad +Router(config-if)#ip address 10.254.10 + ^ +% Invalid input detected at '^' marker. + +Router(config-if)#ip ad +Router(config-if)#ip address 10.254.10.2 255.255.255.0 +Router(config-if)#ex +Router(config)#int s3/0 +Router(config-if)#no shu +Router(config-if)#no shutdown + +%LINK-5-CHANGED: Interface Serial3/0, changed state to down +Router(config-if)#no shu +Router(config-if)#no shutdown +Router(config-if)# +Router(config-if)# +Router(config-if)#ex +Router(config)#inr + ^ +% Invalid input detected at '^' marker. + +Router(config)#t +% Incomplete command. +Router(config)#int s3/0 +Router(config-if)#no shu +Router(config-if)#no shutdown +Router(config-if)# +Router(config-if)# +Router(config-if)# +Router(config-if)#ex +Router(config)#ex +Router# +%SYS-5-CONFIG_I: Configured from console by console +ex + + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router> +Router>en +Router>enable +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#ip ro +Router(config)#ip route 192.168.1.0 255.255.255.0 10.254.10.1 +Router(config)# +%LINK-5-CHANGED: Interface Serial3/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up + +Router(config)# +Router(config)#int s3/0 +Router(config-if)#ip ro +Router(config-if)#ip rou +Router(config-if)#ip route +Router(config-if)#ip route + ^ +% Invalid input detected at '^' marker. + +Router(config-if)#ip rou +Router(config-if)#ex +Router(config)#ex +Router# +%SYS-5-CONFIG_I: Configured from console by console +ex + + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router> +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#int s3/0 +Router(config-if)#ex +Router(config)#ip rou +Router(config)#ip route 192.168.3.0 255.255.255.0 20.20.10.2 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#int f0/0 +Router(config-if)#ip ad +Router(config-if)#ex +Router(config)#int s3/0 +Router(config-if)#ip ad +Router(config-if)#ip address 20.20.10.1 255.255.255.0 +Router(config-if)#ex +Router(config)#ip r +Router(config)#ip route 192.168.1.0 255.255.255.0 10.254.10.1 +Router(config)#ip r +Router(config)#ip route 192.168.3.0 255.255.255.0 20.20.10.2 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + +``` + +``` +Router2 +outer> +Router>en +Router#] +Translating "]"...domain server (255.255.255.255) +% Unknown command or computer name, or unable to find computer address + +Router#con f +% Ambiguous command: "con f" +Router#cont f + ^ +% Invalid input detected at '^' marker. + +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#int s3/0 +Router(config-if)#no shu +Router(config-if)#no shutdown + +Router(config-if)# +%LINK-5-CHANGED: Interface Serial3/0, changed state to up + +Router(config-if)# +%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up + +Router(config-if)#ex +Router(config)#int f0/0 +Router(config-if)#no shu +Router(config-if)#no shutdown + +Router(config-if)# +%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up + +Router(config-if)#ip ad +Router(config-if)#ip address 192.168.3.254 255.255.255.0 +Router(config-if)#ex +Router(config)#int s3/0 +Router(config-if)#ip ad +Router(config-if)#ip address 20.20.10.2 255.255.255.0 +Router(config-if)#cl +Router(config-if)#clock ra +Router(config-if)#clock rate 64000 +This command applies only to DCE interfaces +Router(config-if)#ex +Router(config)#ip r +Router(config)#ip route 192.168.2.0 255.255.255.0 20.20.10.1 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + + +Router> +Router>en +Router#conf t +Enter configuration commands, one per line. End with CNTL/Z. +Router(config)#ip rou +Router(config)#ip route 192.168.1.0 255.255.255.0 10.254.10.1 +Router(config)# + + + + + + + + +Router con0 is now available + + + + + + +Press RETURN to get started. + + + + + + + + + + + + +``` + -- Gitee From eaaa9982de347b0c625c23598b120801c69f411c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E9=BB=84=E5=85=B4=E7=85=8C?= <203837309@qq.com> Date: Thu, 14 May 2026 14:25:39 +0800 Subject: [PATCH 2/2] =?UTF-8?q?20260513=20=E5=8A=A8=E6=80=81=E8=B7=AF?= =?UTF-8?q?=E7=94=B1?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- ...0\346\200\201\350\267\257\347\224\261 .md" | 209 ++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100644 "20 \351\273\204\345\205\264\347\205\214/20260513 \345\212\250\346\200\201\350\267\257\347\224\261 .md" diff --git "a/20 \351\273\204\345\205\264\347\205\214/20260513 \345\212\250\346\200\201\350\267\257\347\224\261 .md" "b/20 \351\273\204\345\205\264\347\205\214/20260513 \345\212\250\346\200\201\350\267\257\347\224\261 .md" new file mode 100644 index 0000000..d428e8f --- /dev/null +++ "b/20 \351\273\204\345\205\264\347\205\214/20260513 \345\212\250\346\200\201\350\267\257\347\224\261 .md" @@ -0,0 +1,209 @@ +第一台路由器连接笔记本电脑的线上设置ip + +``` +Router(config)#int g0/2 +Router(config-if)#no shut + +Router(config-if)# +%LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to up + +Router(config-if)#ip add 192.168.100.254 255.255.255.0 +Router(config-if)#exit +``` + +第一台交换机上的操作 + +``` +Switch(config)#vlan 40 +Switch(config-vlan)#vlan 50 +Switch(config-vlan)#exit +Switch(config)#int f0/2 +Switch(config-if)#sw mo acc +Switch(config-if)#sw acc vlan 40 +Switch(config-if)#int f 0/3 +Switch(config-if)#sw mo acc +Switch(config-if)#sw acc vlan 50 +Switch(config-if)#int f0/1 +Switch(config-if)#sw mo tr + +Switch(config-if)# +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up +``` + +第一个路由器上的操作 + +``` +Router(config-if)#int g0/0.2 +Router(config-subif)# +%LINK-5-CHANGED: Interface GigabitEthernet0/0.2, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0.2, changed state to up + +Router(config-subif)#en do 40 +Router(config-subif)#ip add 192.168.40.254 +% Incomplete command. +Router(config-subif)#ip add 192.168.40.254 255.255.255.0 +Router(config-subif)#exit +Router(config)#int g0/0.3 +Router(config-subif)# +%LINK-5-CHANGED: Interface GigabitEthernet0/0.3, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0.3, changed state to up + +Router(config-subif)#en do 50 +Router(config-subif)#ip add 192.168.50.254 255.255.255.0 +``` + +第一个路由器第三个口的操作 + +``` +Router(config)#int g0/1 +Router(config-if)#ip add 192.168.10.1 255.255.255.0 +Router(config-if)#no shut + +Router(config-if)# +%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up +``` + +第二个交换机设置vlan + +``` +Switch(config)#vlan 60 +Switch(config-vlan)#vlan 70 +Switch(config-vlan)#exit +Switch(config)#int f0/2 +Switch(config-if)#sw mo acc +Switch(config-if)#sw acc vlan 60 +Switch(config-if)#int f0/3 +Switch(config-if)#sw mo acc +Switch(config-if)#sw acc vlan 70 +Switch(config-if)#int f0/1 +Switch(config-if)#sw mo tr + +Switch(config-if)# +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up +``` + +多层交换机上的操作 + +``` +Switch(config)#vlan 60 +Switch(config-vlan)#vlan 70 +Switch(config-vlan)#exit +Switch(config)#int f0/1 +Switch(config-if)#sw tr en do +Switch(config-if)#sw mo tr +Switch(config-if)#exit +Switch(config)#ip routing +Switch(config)#int vlan 60 +Switch(config-if)# +%LINK-5-CHANGED: Interface Vlan60, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan60, changed state to up + +Switch(config-if)#ip add 192.168.60.254 255.255.255.0 +Switch(config-if)#exit +Switch(config)#int vlan 70 +Switch(config-if)# +%LINK-5-CHANGED: Interface Vlan70, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan70, changed state to up + +Switch(config-if)#ip add 192.168.70.254 255.255.255.0 +``` + +多层交换机左边的线设ip + +``` +Switch(config)#int f0/2 +Switch(config-if)#no sw +Switch(config-if)# +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to down + +%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up + +Switch(config-if)#ip add 192.168.10.2 255.255.255.0 +``` + +多层交换机右边的线设ip + +``` +Switch(config-if)#int f0/3 +Switch(config-if)#no shut +Switch(config-if)#no sw +Switch(config-if)#ip add 192.168.20.1 255.255.255.0 +``` + +给第三台路由器设置ip并打开 + +``` +Router(config)#int g0/0 +Router(config-if)#ip add 192.168.20.2 255.255.255.0 +Router(config-if)#no shut + +Router(config-if)# +%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up +``` + +给第三台交换机trunk + +``` +Switch(config)#int f0/1 +Switch(config-if)#sw mo tr +``` + +第三台路由器下面的线的操作 + +``` +Router(config-if)#inter g0/1 +Router(config-if)#ip add 192.168.30.254 255.255.255.0 +Router(config-if)#no shut + +Router(config-if)# +%LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up + +%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up +``` + +ospf协议 + +``` +Router(config)#router ospf 1 +Router(config-router)#net 192.168.100.0 0.0.0.255 ar +Router(config-router)#net 192.168.100.0 0.0.0.255 area 0 +Router(config-router)#net 192.168.40.0 0.0.0.255 ar 0 +Router(config-router)#net 192.168.50.0 0.0.0.255 ar 0 +Router(config-router)#net 192.168.10.1 0.0.0.255 ar 0 + + +Switch(config)#rou os 1 +Switch(config-router)#net 192.168.10.2 0.0.0.255 ar 0 +01:07:13: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.100.254 on FastEthernet0/2 from LOADING to FULL, Loading Done +Switch(config-router)#net 192.168.60.0 0.0.0.255 ar 0 +Switch(config-router)#net 192.168.70.0 0.0.0.255 ar 0 +Switch(config-router)#net 192.168.20.1 0.0.0.255 ar 0 + + +Router(config)#router os 1 +Router(config-router)#net 192.168.20.2 0.0.0.255 ar 0 +Router(config-router)# +01:09:39: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.70.254 on GigabitEthernet0/0 from LOADING to FULL, Loading Done + +Router(config-router)#net 192.168.30.0 0.0.0.255 ar 0 +``` + +![image-20260513121453972](https://gitee.com/ding-junhaooye/picture/raw/master/pic/upgit_20260513_1778645694.png) + +![image-20260513121511270](https://gitee.com/ding-junhaooye/picture/raw/master/pic/upgit_20260513_1778645711.png) + +![image-20260513121518646](https://gitee.com/ding-junhaooye/picture/raw/master/pic/upgit_20260513_1778645718.png) -- Gitee